MSRP:
Now:
$26.40
Was:
— You save
Description
Control Plate for Tele
Standard Tele control plate. Does NOT include mounting screws.
Telecaster®, Tele® are registered trademarks of Fender Musical Instruments Corporation.
Related Products


T-Style Deluxe Template Set
Potvin
MSRP:
Now:
$99.95
Was:
T-Style Deluxe Template Set features:
S-Style neck pocket and large headstock neck template.
Drilled for S-Style hardtail bridge.
Routed to accept standard or wide-range humbuckers...

T/S-Style Template Set
Potvin
MSRP:
Now:
$99.95
Was:
T-Style body routed for S-Style trem! This Mashup combines two classics into the best of both worlds.
Available with T or S neck pocket and matching neck / pickguard.
Also...


T-Style Custom Template Set
Potvin
MSRP:
Now:
$99.95 - $109.95
Was:
The T-Style Custom has a standard T-Style bridge pickup and is available with Standard or Wide Range Humbucker pickguard for neck pickup option.
1/2" MDF with engraved center lines and reference...

T-Style Double Neck Template Set
Potvin
MSRP:
Now:
$141.95
Was:
The T-Style Double-neck template comes standard with two 25-1/2" scale necks (upper 12 string, lower 6 string), standard T-Style pickups and bridges are also the default. The 12 string neck has...

T-Style Nashville Template Set
Potvin
MSRP:
Now:
$99.95
Was:
Nashville T-Style
The Nashville T-Style offers expanded sonic options thanks to the addition of a Strat middle pickup and five-way switching.
1/2" MDF with engraved center lines and reference...
Customers Also Viewed


Tele Neck Modern 22 Fret Maple
ALLPARTS
MSRP:
Now:
$226.00
Was:
Tele Neck / Modern 22 Frets / One Piece Maple (Allparts)
Nut is not included. Screw holes for attaching to the body are not drilled.
22 jumbo frets (.118" x .055")
Maple neck, sanded,...


Tele Neck 22 Fret
ALLPARTS
MSRP:
Now:
$259.00
Was:
Tele Neck / Modern 22 Frets (Allparts)
Nut is not included. Screw holes for attaching to the body are not drilled.
22 jumbo frets (.118" x .055")
Maple neck, sanded, unfinished and...
Out of stock
Bundle with a neck for savings!


T-Style Danelectro™ inspired body
Potvin
MSRP:
Now:
$225.95
Was:
T-Style Danelectro inspired body
This body fits our selection of Telecaster necks like a glove! Save when you buy a neck and body together. Recommended parts list is below.
Inspired by...

Binding Jig T-Style
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...


Strat Neck Vintage 21 Fret
ALLPARTS
MSRP:
Now:
$259.00
Was:
Strat Neck / Vintage 21 Frets (Allparts)
Nut is not included. Screw holes for attaching to the body are not drilled.
21 vintage frets (.079" x .043")
Maple neck, sanded, unfinished...
Out of stock


Guitar Body Blank DIY T-Style
Potvin
MSRP:
Now:
$199.95
Was:
Pre-routed Guitar Body Blank (T-Style)
Sample swamp-ash body shown.
Not ready to fully tackle making your own body? No problem. This pre-routed body blank already has all the advanced...

Jack Plate for Strat
ALLPARTS
MSRP:
Now:
$6.90 - $15.60
Was:
Jack Plate for Strat
Standard Stratocaster jack mounting plate.
Mounting screws included.
Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation.

Snakehead Neck Template
Potvin
MSRP:
Now:
$37.95
Was:
Snakehead neck template available with T-Style or S-Style shaped heel.
1/2" MDF with engraved center lines and reference markings.
Requires neck blank minimum 25" x 3" (64cm x 8)


String Retainer Block
Potvin
MSRP:
Now:
$24.95
Was:
The String Retainer Block is an alternative to individual ferrules on string-through guitar bodies. Instead of drilling 6 individual holes for ferrules, a router is used to create a...

Control Cavity Template Set
Potvin
MSRP:
Now:
$49.95
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...