Templates

This control cavity template set is a little more compact, but still large enough to house controls for a standard S-Style guitar. . Perfect for any rear-route / no-pickguard project. 3/4" MDF

Most Floyd Rose routing templates are generously over-sized which results in a large unattractive gap.  This template set has a tighter recess perimeter and leaves more wood around the Floyd posts; a way better design and a cleaner look. The set...

The Starmaster is s 25.5" bolt-on template set.  Available with wide range humbucker or standard humbucker routes. 1/2" MDF with engraved center lines and reference markings. Requires body blank minimum 19" x 16" (49cm x 41)

This is a 24.75" scale 22 fret set neck version of a classic!  Remember to order a set of Neck Angle Wedges to make routing the neck pocket at the correct angle a snap. 1/2" MDF with engraved center lines and reference markings. Requires body...

This R330 is a 24.75" scale, 24 fret set neck template set.  Drilled for a Tunoe-o-matic style bridge and tailpiece, available with Humbuckers or filtertrons.  Ask about other hardware options. 1/2" MDF with engraved center lines and...

The classic Mustang Template set is available in a variety of vintage configurations but we've also added some optional modern conveniences to make a truly versatile set. Scale length: although 24" scale with 22 frets is most common, there were some 22...

The LP Special Doublecut bolt-on is a 25-1/2" scale version of this classic model.  Use your existing neck or build your own with the included templates.  Remember to order a set of Neck Angle Wedges to make routing the neck pocket at the...

The LP Special Doublecut is essentially a 2 pickup (soapbar P90s) version of the LP Jr Doublelecut.  The simplified neck joint also makes this set perfect for those new to building set-neck guitars.  Remember to order a set...

The RR template set (24 fret, 25.5" scale length) is available with several popular humbucker pickup options including DiMarzio, Bare Knuckle and Seymour Duncan.  Choose from either Hipshot, Floyd Rose (posts only) or Tuneomatic and...

Bass Conversion Neck 34" to 35" compatible with our P-Style Bass template set.  Convert a 34" scale bass into a 35" scale without modifying the body or moving the bridge.   1/2" MDF with engraved center lines and reference markings...

The Wide Range Humbucker routing template comes in two versions; one for routing the guitar's body and one for routing the pickguard.  Save when you buy both! 3/4" MDF with engraved center lines.

The MB Neck-Through template set has a 24-5/8" scale length and is available with two bridge options.  If you choose the Floyd Rose Posts only option, you'll also want to order our full Floyd Rose Recessed Routing Template Set.  Also...

The MB Bolt-On template set has a 25-1/2" scale bolt-on neck and is available with a selection of bridges.  If you choose the Floyd Rose Posts only option, you'll also want to order our full Floyd Rose Recessed Routing Template Set...

The Twister  is the Lego of template sets! With the choice of either T or S-Style neck/pocket, and selection of pickups and bridges, the combinations are endless!  This set has a 25-1/2" scale, but if you prefer the 24-3/4" scale of the...

The LP Special bolt-on is a 25-1/2" scale version of this classic model.  Use your existing neck or build your own with the included templates.  Several bridge options available.  If you choose  Tuneomatic (TOM) and tailpiece OR...

Inspired by classic acoustic parlor guitars, this 24.75" scale setneck electric parlor Single cut template set can be built either as a solid body or chambered.  No control cavity is required as the F-hole is large enough to pass a...

Inspired by classic acoustic parlor guitars, this 24.75" scale setneck electric parlor template set can be built either as a solid body or chambered.  No control cavity is required as the F-hole is large enough to pass a potentiometer...

The 339 is the little brother of the 335!  At 14" from side to side, it's a scaled down version with all the vibe of its big brother.  This template set is not only for those who want to make a traditional archtop with bent sides, although you...

This R620 is a 25.5" scale, bolt-on neck template set.  Drilled for stop bar (wraparound) bridge, available with Humbuckers or filtertrons.  Ask about other hardware options. 1/2" MDF with engraved center lines and reference markings...

The Acoustic OM Template Set includes everything shown.  The bracing pattern is engraved, with "windows" at each end for easy transfer to work pieces.  This set has a longer scale and wider nut width than our OO Template Set 20...