295-Style Archtop Template Set

Inspired by the classic 295, this template set features a simplified glued (setneck) neck joint.  The original 295 features a trapeze tailpiece and floating bridge which is still an option, but the templates are drilled for either a wraparound...

335 DG-Style Archtop Template Set

The DG is a variation of the ES Style template set featuring diamond f-holes and a 6 in-line headstock. As with the ES style, the DG is not only for those who want to make a traditional archtop with bent sides, although you could use these templates to...

335-Style Archtop Template Set

This template set is not only for those who want to make a traditional archtop with bent sides, although you could use these templates to do just that.  Other possible build ideas include: slab body (no chambers or f-holes) chambered thinline...

339-Style Archtop Template Set

The 339 is the little brother of the 335!  At 14" from side to side, it's a scaled down version with all the vibe of it's big brother.  This template set is not only for those who want to make a traditional archtop with bent sides, although you...

339-Style Bolt-on Archtop Template Set

The 339 Bolt-on template set is a 25.5" scale version of the 339 Set neck template set.   The standard 25.5" scale length and T-Style heel means you can use your existing bolt-on neck, or build your own with the included templates. The 339 is...

BB-Style Template Set

BB style 24.75" scale, setneck template set.  The collaboration between Billy Gibbons of ZZ-Top and Bo Diddley (hence the name "Billy Bo") produced this quirky yet classic design. Also available in a bolt-on neck version. 1/2" MDF with...

Binding Jig LP Jr Doublecut

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold as tight as you'd like. With this jig you just press...

Binding Jig LP-Style

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold as tight as you'd like. With this jig you just press...

Binding Jig Parlor

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold as tight as you'd like. With this jig you just press...

D-Jet Template Set

The D-Jet is a 24.6" scale, 22 fret template set.  Drilled for Tune-o-matic bridge and NO stop tailpiece, routed for BOTH humbucker and Filtertron pickups.  Ask about other hardware options. 1/2" MDF with engraved center lines and reference...

Exp-Style '58 Template Set

Classic '58 Exp-Style template set.  Also available as a 25.5" bolt-on body. 1/2" MDF with engraved center lines and reference markings. Requires body blank minimum 23" x 18" (59cm x 46)

FB-Style Non-Reverse Template Set

Non-reverse FB style 24.75" scale, set-neck template set.  It's a bit of a brain bender remembering which FB-style is which.  The more familiar version made famous but such players as Johnny Winter is actually the REVERSE version...