Binding Jig T-Style

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold as tight as you'd like. With this jig you just press...

Bullet T-Style Template Set

The Bullet T-Style is a 1980's classic.  With a smaller, thinner body than a standard T-Style, the Bullet-T was a replacement for other small models like the Mustang. 1/2" MDF with engraved center lines and reference markings. Requires body blank...

Cabronita T-Style Template Set

The Cabronita is a twist on the Classic T-Style. Featuring a Half (or "short") bridge, filtertron pickups and rear routed control cavity. TIP! If you prefer to recess the rear cavity cover (as opposed to surface mount), remember to order one of...

S/T-Style Template Set

S-Style body routed for T-Style hardware! This Mashup combines two classics into the best of both worlds.   Available with T or S neck pocket and matching neck / pickguard. Also available: T/S Template set 1/2" MDF with engraved center lines...

Snakehead T-Style Template Set

Snakehead T-Style template set. 1/2" MDF with engraved center lines and reference markings. Requires body blank minimum 16.5" x 13" (42cm x 33)Requires neck blank minimum 26" x 3.5" (66cm x 9)

String Retainer Block

The String Retainer Block is an alternative to individual ferrules on string-through guitar bodies.    Instead of drilling 6 individual holes for ferrules, a router is used to create a perfect pocket that the block drops into.  Never deal...

String Retainer Block Template

The String Retainer Block Template is what you'll need if you're using my String Retainer Blocks as a alternative / upgrade for individual string ferrules on the back of your guitar body.  User your router to create a perfect pocket in the body for...

T-Master Mini Template Set

The T-Master Mini template set (21 fret, 22.5" scale length, 1.625" nut width) is a 3/4 size model that's perfect for kids, travel guitars or for any shortscale fan.  Uses standard (full-size) bridge, pickups and control plate. 1/2" MDF with...

T-Master Template Set

The T-Master - it's a little bit T-Style and a little bit J-Style, a classic mash-up. 1/2" MDF with engraved center lines and reference markings. Requires body blank minimum 20" x 14" (51cm x 37)Requires neck blank minimum 26" x 3.5" (66cm x 9)

T-Style Chambering Template

Add chambers to any T-Style build.  This is the chambering portion from the '72 and '69 T-Style thinline sets. If you'd like to make a non-thinline T-style, add this component to the standard T-style set and you're good to go.  Options include...

T-Style Control Cavity Template

This control cavity template set has a standard T-Style cavity.  It also includes a template for routing your own covers and the matching recess.  Perfect for any rear route T-Style projects. 3/4" MDF

T-Style Custom Template Set

The T-Style Custom has a standard T-Style bridge pickup and is available with Standard or Wide Range Humbucker pickguard for neck pickup option. 1/2" MDF with engraved center lines and reference markings. Requires body blank minimum 16.5" x 13" (42cm x...