Frequently bought together:
Description
Smuggler T-Style template set.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 16.5" x 13" (42cm x 33)
Requires neck blank minimum 26" x 3.5" (66cm x 9)
Related Products

T-Style Template Set
MSRP:
Now:
$89.95
Was:
T-Style Template Set
Build your own vintage T-Style guitar. This set takes care of all the important details including accurate locations for routing pickups, neck pocket, control cavities,...
Out of stock


T-Style Smuggler Body #156
MSRP:
Now:
$224.95
Was:
This unfinished T-Style body features "Smuggler" style chambers and weighs in at 3.3 lbs! A vintage style single ply white pickguard is included at no extra cost.
Specs:
two piece...

T-Style Doublecut Template Set
MSRP:
Now:
$89.95
Was:
Here's a twist on a classic- the T-Style Double cutaway!
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 16.5" x 13" (42cm x 33)Requires neck blank minimum...

T-Style Mini Template Set
MSRP:
Now:
$89.95
Was:
The T-Style Mini template set (21 fret, 22.5" scale length, 1.625" nut width) is a 3/4 size model that's perfect for kids, travel guitars or for any shortscale fan. Uses standard...

Bullet T-Style Template Set
MSRP:
Now:
$89.95
Was:
The Bullet T-Style is a 1980's classic. With a smaller, thinner body than a standard T-Style, the Bullet-T was a replacement for other small models like the Mustang.
1/2" MDF with engraved...
Customers Also Viewed

T-Style Template Set
MSRP:
Now:
$89.95
Was:
T-Style Template Set
Build your own vintage T-Style guitar. This set takes care of all the important details including accurate locations for routing pickups, neck pocket, control cavities,...

Binding Jig T-Style
MSRP:
Now:
$43.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

Snakehead T-Style Template Set
MSRP:
Now:
$89.95
Was:
Snakehead T-Style template set.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 16.5" x 13" (42cm x 33)Requires neck blank minimum 26" x 3.5" (66cm x 9)
Out of stock


Neck Angle Wedge Kits
MSRP:
Now:
$16.95
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...

Snakehead Neck Template
MSRP:
Now:
$33.95
Was:
Snakehead neck template available with T-Style or S-Style shaped heel.
1/2" MDF with engraved center lines and reference markings.
Requires neck blank minimum 25" x 3" (64cm x 8)


T-Style Thinline Template Set ('72 Style)
MSRP:
Now:
$89.95
Was:
'72 T-Style Thinline template set. Includes chambering template that will reduce overall weight by 35%. Availble with wide range humbucker or standard humbucker routes. Ask about custom...


T-Style Thinline Template Set ('69 Style)
MSRP:
Now:
$89.95
Was:
'69 T-Style Thinline set featuring standard T-Style bridge and pickups.
Also available: '72 style thinline
1/2" MDF with engraved center lines and reference markings.
Requires body...
Out of stock


T-Style Smuggler Body #156
MSRP:
Now:
$224.95
Was:
This unfinished T-Style body features "Smuggler" style chambers and weighs in at 3.3 lbs! A vintage style single ply white pickguard is included at no extra cost.
Specs:
two piece...
Out of stock


T-Style Body #155
MSRP:
Now:
$349.95
Was:
This unfinished T-Style body has a beautifuly figured walnut top that has been inlaid into a carefully weight-relieved swamp ash body.
Compare at over $530 from other suppliers (not that you'll...

String-Through Body Drill Guide
MSRP:
Now:
$16.95
Was:
You know how, try as you might, you can't drill those darn string through holes evenly spaced? Well, here's the answer to that problem.This guide has five perfectly spaced hole patterns to...