Potvin
Acoustic OO Template Set
- SKU:
- UPC:
- MPN:
- Availability:
- Usually ships in 1 to 3 weeks
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$99.95
Was:
— You save
Description
The Acoustic OO Template Set includes everything shown. The bracing pattern is engraved, with "windows" at each end for easy transfer to work pieces. This set has a shorter scale and narrower nut width than our OM Template Set
- 20 frets
- 24.9" Scale length
- 1.6875" (1-11/16") nut width
1/2" MDF with engraved center lines and reference markings.
Related Products

Acoustic OM Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The Acoustic OM Template Set includes everything shown. The bracing pattern is engraved, with "windows" at each end for easy transfer to work pieces. This set has a longer scale and...

Mosrite Template Set
Potvin
MSRP:
Now:
$99.95
Was:
This is a 24.75" scale 22 fret set neck version of a classic! Remember to order a set of Neck Angle Wedges to make routing the neck pocket at the correct angle a snap.
1/2" MDF with...

Talman Style Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The Talman-Style template set (25.5" scale, bolt-on neck) includes a neck template but also has a standard S-Style neck pocket so you can use your existing neck. Choose from several bridge...

JP6 Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The JP6 template set (24 fret, 25.5" scale length) is available with three pickup choices and three bridge choices.
If you choose the Floyd Rose bridge option, you may also be...

Wildkat Template Set
Potvin
MSRP:
Now:
$99.95
Was:
Wildkat
The Wildkat Template Set is a smaller-body (14"/35.5cm), semi-hollow guitar. Unlike the original, this set features a 25.5" scale bolt-on neck so you can use your existing T-style...
Customers Also Viewed

Acoustic OM Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The Acoustic OM Template Set includes everything shown. The bracing pattern is engraved, with "windows" at each end for easy transfer to work pieces. This set has a longer scale and...


Neck Angle Wedge Kits
Potvin
MSRP:
Now:
$22.95 - $59.95
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...


Headstock Angle Jig
Potvin
MSRP:
Now:
$159.95 - $179.95
Was:
The adjustable Headstock Angle Jig makes cutting accurate angles on neck blanks a snap. Fence adjusts from 10 to 17 degrees in 1 degree increments. Simply loosen all three star knobs,...

Floyd Rose Routing Template
Potvin
MSRP:
Now:
$49.95
Was:
Floyd Rose Recessed Routing Template
Most Floyd Rose bridge templates are generously over-sized which results in a large un-attractive gap. This template set has a tighter recess perimeter and...

Fret Scale Template
Potvin
MSRP:
Now:
$49.95 - $60.95
Was:
Cut accurate fret slots either by hand or with your table saw. Each Fret Scale Template includes two different scales with 24 frets. The slots accommodate a 1/16" indexing pin (not...

Binding Jig Parlor
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...


LP Top Carve Template Set
Potvin
MSRP:
Now:
$94.95
Was:
The LP Top Carve template set is used with your router to cut "steps" into a maple (or other) top. Once the steps are cut, you then sand away the rough steps to end up with a beautifully...

Binding Jig T-Style
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

Control Cavity Template Set
Potvin
MSRP:
Now:
$49.95
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...

Binding Jig LP-Style
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...