Frequently bought together:
Description
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold as tight as you'd like.
With this jig you just press the binding into the slot to get a perfect fit. You can still use a hair dryer or heat gun for tight curves. The slot is milled to accept up to 0.09" thick binding.
The Parlor Binding jig is compatible with both the Parlor Electric Template Set and the Parlor Electric Singlecut Template Set
Available in other body styles, email for details.
1/2" MDF.
Related Products

Binding Jig T-Style
MSRP:
Now:
$46.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

Binding Jig LP-Style
MSRP:
Now:
$46.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Binding Jig LP Jr Doublecut
MSRP:
Now:
$46.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Binding Jig Iceman
MSRP:
Now:
$46.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Binding Jig EXP-Style
MSRP:
Now:
$46.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...
Customers Also Viewed


Neck Angle Wedge Kits
MSRP:
Now:
$19.95 - $49.95
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...

Parlor Electric Singlecut Bolt-on Template Set
MSRP:
Now:
$94.95
Was:
Parlor Singlecut Bolt-on
Inspired by classic acoustic parlor guitars, this 25.5" scale template set can be built either as a solid body or chambered. The neck template is included,...

Parlor Electric Template Set
MSRP:
Now:
$94.95
Was:
Inspired by classic acoustic parlor guitars, this 24.75" scale setneck electric parlor template set can be built either as a solid body or chambered. No control cavity is required as...

Parlor Electric Singlecut Template Set
MSRP:
Now:
$94.95
Was:
Inspired by classic acoustic parlor guitars, this 24.75" scale setneck electric parlor Single cut template set can be built either as a solid body or chambered. No control cavity is...

Binding Jig LP-Style
MSRP:
Now:
$46.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Control Cavity Template Set
MSRP:
Now:
$46.95
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...


LP-Style Chambering Templates
MSRP:
Now:
$46.95 - $169.95
Was:
Create weight relieved LP-style bodies. There are four styles to choose from: Full Chamber, Modern, BFG and Cloud-9. Save when you order all four.
1/2" MDF with engraved center lines and...

Binding Jig T-Style
MSRP:
Now:
$46.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

Floyd Rose Recessed Routing Template Set
MSRP:
Now:
$46.95
Was:
Updated v2 set now available! The streamlined process is now easier than ever.
Most Floyd Rose routing templates are generously over-sized which results in a large un-attractive gap. This...


LP Top Carve Template Set
MSRP:
Now:
$89.95
Was:
The LP Top Carve template set is used with your router to cut "steps" into a maple (or other) top. Once the steps are cut, you then sand away the rough steps to end up with a beautifully...