Potvin
Newport Map Template Set
- SKU:
- UPC:
- MPN:
- Availability:
- Usually ships in 1 to 3 weeks
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$99.95
Was:
— You save
Description
Newport Map
The Newport Map template set is inspired by the classic Res-O-glass models of the '60s. The set features a 25.5" scale length bolt-on neck. The neck template is included, but you can use your own standard T or S-Style neck.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 20" x 15" (51cm x 38)
1 Review
-
5 Great template set!
Posted by Travis on 2023 Feb 25th
Loved using this set! I’ve been searching for a map template,and this nailed it! Thanks!
Related Products


T-Master Template Set
Potvin
MSRP:
Now:
$99.95
Was:
T-Master
The T-Master - it's a little bit T-Style and a little bit J-Style, a classic mash-up.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 20" x 14"...

String Retainer Block Template
Potvin
MSRP:
Now:
$18.95
Was:
The String Retainer Block Template is what you'll need if you're using my String Retainer Blocks as an alternative / upgrade for individual string ferrules on the back of your guitar body. Use...

Twister Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The Twister is the Swiss Army Knife of template sets! With the choice of either T or S-Style neck/pocket, and selection of pickups and bridges, the combinations are endless! This set has...

JP6 Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The JP6 template set (24 fret, 25.5" scale length) is available with three pickup choices and three bridge choices.
If you choose the Floyd Rose bridge option, you may also be...

Wildkat Template Set
Potvin
MSRP:
Now:
$99.95
Was:
Wildkat
The Wildkat Template Set is a smaller-body (14"/35.5cm), semi-hollow guitar. Unlike the original, this set features a 25.5" scale bolt-on neck so you can use your existing T-style...
Customers Also Viewed


Neck Angle Wedge Kits
Potvin
MSRP:
Now:
$22.95 - $59.95
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...

Floyd Rose Routing Template
Potvin
MSRP:
Now:
$49.95
Was:
Floyd Rose Recessed Routing Template
Most Floyd Rose bridge templates are generously over-sized which results in a large un-attractive gap. This template set has a tighter recess perimeter and...

Binding Jig T-Style
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Control Cavity Template Set
Potvin
MSRP:
Now:
$49.95
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...


Wolf Style Template Set
Potvin
MSRP:
Now:
$99.95 - $119.95
Was:
Wolf Style Template Set
A design made famous by Jerry Garcia of the Grateful Dead! The Wolf template set has a 25.5" scale length bolt-on neck. The neck template is included,...

RG-Style 6 String 27" Neck Conversion Kit
Potvin
MSRP:
Now:
$49.95
Was:
This template set is an add-on to our RG-Style 6 String Template Set. The kit contains a 27" scale 25 fret neck and fretboard template that replace those included in the standard 25.5" set...

S-Style Template Set ('62 Style)
Potvin
MSRP:
Now:
$99.95
Was:
S-Style Template Set
The classic '62 S-Style Template set is available in a variety of configurations. Choose from top routed (the "normal" S-Style with a pickguard), or back routed (no...


Tulip Template Set
Potvin
MSRP:
Now:
$99.95 - $119.95
Was:
Tulip
The Tulip has a 25.5" scale length bolt-on neck. The neck template is included, but you can use your own standard T or S-Style neck. The body template has a universal route to...

S-Style Chambering Template
Potvin
MSRP:
Now:
$49.95
Was:
S-Style Chambering Template
A chambered Strat body?! Yes! A standard Strat has heavy contours on the front and back, and a large edge radius that would normally prevent making a...

Control Cavity Template Set (Type 2)
Potvin
MSRP:
Now:
$49.95
Was:
This control cavity template set is a little more compact, but still large enough to house controls for a standard S-Style guitar. . Perfect for any rear-route / no-pickguard project.
3/4" MDF