Potvin

Iceman Binding Jig Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and...

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

RD-Style Binding Jig Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape...

Pre-forming binding before gluing makes life easier when you come to those sharp bends.  You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Here's a foolproof method to route those tiny slots for blade switches such as those on an S-Style or T-Style guitar. Requires a 1/2" guide bushing collar for your router (not included). 1/2"...

The Bullet T-Style is a 1980's classic.  With a smaller, thinner body than a standard T-Style, the Bullet-T was a replacement for other small models like the Mustang. 1/2" MDF with engraved...

The Cabronita is a twist on the Classic T-Style. Featuring a Half (or "short") bridge, filtertron pickups and rear routed control cavity. TIP! If you prefer to recess the rear cavity cover (as...

Full Caddy-Style template set with 25-1/2" scale bolt-on neck. 1/2" MDF with engraved center lines and reference markings. Requires body blank minimum 18" x 13.5" (46cm x 35)

This control cavity template set is the standalone version of the control cavity in the full T-Style '69 Thinline set.  . Perfect for any rear-route / no-pickguard project. 3/4" MDF

This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...