Frequently bought together:
Description
T-Style Add-on Kit
Add more pickup options to your T-Style builds. This kit is a drop-in replacement for the neck pocket in the standard T-Style Template Set. An optional matching pickguard is also available.
Features a standard T-Style neck pocket and bridge positioned for prefect 25.5" scale alignment.
Please Note: the "Filtertron x 2" option requires a T-Style Half-bridge, also known as a "short" or "chopped" bridge.
1/2" MDF with engraved center lines and reference markings.
Related Products

T-Style Template Set
MSRP:
Now:
$115.09
Was:
T-Style Template Set
Build your own vintage T-Style guitar. This set takes care of all the important details including accurate locations for routing pickups, neck pocket, control cavities,...


T-Style Pickup Templates
MSRP:
Now:
$21.69
Was:
We've got every T-Style pickup template you can imagine. Choose from neck position (body and pickguard versions) or bridge position. Save when you take all three!
3/4" MDF with engraved...

Binding Jig T-Style
MSRP:
Now:
$56.23
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

T-Style Chambering Template
MSRP:
Now:
$56.23
Was:
Add chambers to any T-Style build. This is the chambering portion from the '72 and '69 T-Style thinline sets. If you'd like to make a non-thinline T-style, add this component to the standard...
Out of stock


T-Style Body #157
MSRP:
Now:
$447.76
Was:
This unfinished T-Style body has a beautifully figured walnut top that has been inlaid into a carefully weight-relieved swamp ash body. The back has been routed for one of our String...
Customers Also Viewed

T-Style Template Set
MSRP:
Now:
$115.09
Was:
T-Style Template Set
Build your own vintage T-Style guitar. This set takes care of all the important details including accurate locations for routing pickups, neck pocket, control cavities,...
Out of stock


Neck Angle Wedge Kits
MSRP:
Now:
$21.69
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...

Control Cavity Template Set
MSRP:
Now:
$56.23
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...

Binding Jig T-Style
MSRP:
Now:
$56.23
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

T-Style Chambering Template
MSRP:
Now:
$56.23
Was:
Add chambers to any T-Style build. This is the chambering portion from the '72 and '69 T-Style thinline sets. If you'd like to make a non-thinline T-style, add this component to the standard...

Snakehead Neck Template
MSRP:
Now:
$43.44
Was:
Snakehead neck template available with T-Style or S-Style shaped heel.
1/2" MDF with engraved center lines and reference markings.
Requires neck blank minimum 25" x 3" (64cm x 8)

Conversion Neck Template 25.5 to 27.0 Baritone
MSRP:
Now:
$43.44
Was:
Build your own conversion neck! A conversion neck allows you to turn a 25.5" (Fender) scale guitar into a 27.0" scale 22 fret baritone guitar without modifying the body or moving the bridge...

T-Style Neck Template
MSRP:
Now:
$43.44
Was:
Standard T-Style neck template.
1/2" MDF with engraved center lines and reference markings.
Requires neck blank minimum 26" x 3.5" (66cm x 9)


Mashup Neck Pocket Template
MSRP:
Now:
$56.23
Was:
Mashup Custom Neck Pocket Template (25-1/2" scale)
Customize for your needs! Choose a neck pocket type (S or T Style) and select a bridge option (T-Style, S-Style hardtail, Tuneomatic and...

T-Style F-hole Template
MSRP:
Now:
$21.69
Was:
Add a T-style f-hole to any design. This is the same f-hole as appears in our T-Style Thinline template sets.
NOTE: this f-hole is not large enough to pass potentiometers through.
1/2" MDF.