Potvin
T-Style F-hole Template
- SKU:
- UPC:
- MPN:
- Availability:
- Usually ships in 1 to 3 weeks
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$18.95
Was:
— You save
Description
Add a T-style f-hole to any design. This is the same f-hole as appears in our T-Style Thinline template sets.
NOTE: this f-hole is not large enough to pass potentiometers through.
1/2" MDF.
1 Review
-
5 Elegant
Posted by Seigmund Custom Guitars on 2017 Dec 18th
Nice proportions and plenty big enough to comfortably route your F-hole
Related Products

335-Style F-hole Template
Potvin
MSRP:
Now:
$18.95
Was:
Add a 335-style f-hole to any design. This is the same f-hole as appears in our 335-Style template set.
NOTE: this f-hole is not large enough to pass potentiometers through.
1/2"...

Diamond F-hole Template
Potvin
MSRP:
Now:
$18.95
Was:
Add a diamond shaped f-hole to any design. This is the same f-hole as appears in our DG style 335 template set.
NOTE: this f-hole is large enough to pass a CTS potentiometer through.
1/2" MDF.

Violin F-hole Template
Potvin
MSRP:
Now:
$18.95
Was:
Add a Violin style F-hole to any design.
1/2" MDF.

F-hole Template (Type-03)
Potvin
MSRP:
Now:
$18.95
Was:
Add some class to your guitar build with an F-hole!
1/2" MDF.
Customers Also Viewed


Neck Angle Wedge Kits
Potvin
MSRP:
Now:
$22.95 - $59.95
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...

J-Master Chambering Template
Potvin
MSRP:
Now:
$49.95
Was:
The J-Master chamber template works perfectly with our full J-Master template set and allows you to create a weight relieved J-Master body. You can also use one our f-hole templates and...


J-Master Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The J-Master template set includes everything you need to build this offset classic. Due to popular request, the J-Master set is available with standard pickups and bridge as well as a dual...

T-Style Chambering Template
Potvin
MSRP:
Now:
$49.95
Was:
Add chambers to any T-Style build. This is the chambering portion from the '72 and '69 T-Style thinline sets. If you'd like to make a non-thinline T-style, add this component to the standard...

Binding Jig T-Style
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

Cabronita T-Style Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The Cabronita is a twist on the Classic T-Style. Featuring a Half (or "short") bridge, filtertron pickups and rear routed control cavity.
TIP! If you prefer to recess the rear cavity cover (as...


T-Master Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The T-Master - it's a little bit T-Style and a little bit J-Style, a classic mash-up.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 20" x 14" (51cm x...

Conversion Neck Template 25.5 to 27.0 Baritone
Potvin
MSRP:
Now:
$37.95 - $61.95
Was:
Build your own conversion neck! A conversion neck allows you to turn a 25.5" (Fender) scale guitar into a 27.0" scale 22 fret baritone guitar without modifying the body or moving the bridge...

S-Style Template Set ('62 Style)
Potvin
MSRP:
Now:
$99.95
Was:
The classic '62 S-Style Template set is available in a variety of configurations. Choose from top routed (the "normal" S-Style with a pickguard), or back routed (no pickguard). For the...

Control Cavity Template Set
Potvin
MSRP:
Now:
$49.95
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...