Potvin
Tulip Template Set
- SKU:
- UPC:
- MPN:
- Availability:
- Usually ships in 1 to 3 weeks
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$136.33
Was:
— You save
Description
Tulip
The Tulip has a 25.5" scale length bolt-on neck. The neck template is included, but you can use your own standard T or S-Style neck. The body template has a universal route to accommodate most pickup configurations. One pickguard of your choice is included with the set but you can add a second or even a third while you're at it! Ask about custom pickup/pickguard options.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 15" x 12" (38cm x 31) NOTE: This is a tight fit! A bit longer and wider would be optimal.
Related Products

Twister Template Set
Potvin
MSRP:
Now:
$136.33
Was:
The Twister is the Swiss Army Knife of template sets! With the choice of either T or S-Style neck/pocket, and selection of pickups and bridges, the combinations are endless! This set has...

Mosrite Template Set
Potvin
MSRP:
Now:
$136.33
Was:
This is a 24.75" scale 22 fret set neck version of a classic! Remember to order a set of Neck Angle Wedges to make routing the neck pocket at the correct angle a snap.
1/2" MDF with...

Talman Style Template Set
Potvin
MSRP:
Now:
$136.33
Was:
The Talman-Style template set (25.5" scale, bolt-on neck) includes a neck template but also has a standard S-Style neck pocket so you can use your existing neck. Choose from several bridge...

JP6 Template Set
Potvin
MSRP:
Now:
$136.33
Was:
The JP6 template set (24 fret, 25.5" scale length) is available with three pickup choices and three bridge choices.
If you choose the Floyd Rose bridge option, you may also be...

Wildkat Template Set
Potvin
MSRP:
Now:
$136.33
Was:
Wildkat
The Wildkat Template Set is a smaller-body (14"/35.5cm), semi-hollow guitar. Unlike the original, this set features a 25.5" scale bolt-on neck so you can use your existing T-style...
Customers Also Viewed


Neck Angle Wedge Kits
Potvin
MSRP:
Now:
$31.30 - $81.77
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...

Floyd Rose Routing Template
Potvin
MSRP:
Now:
$68.13
Was:
Floyd Rose Recessed Routing Template
Most Floyd Rose bridge templates are generously over-sized which results in a large un-attractive gap. This template set has a tighter recess perimeter and...

Binding Jig T-Style
Potvin
MSRP:
Now:
$68.13
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...

Control Cavity Template Set
Potvin
MSRP:
Now:
$68.13
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...

Snakehead Neck Template
Potvin
MSRP:
Now:
$51.76
Was:
Snakehead neck template available with T-Style or S-Style shaped heel.
1/2" MDF with engraved center lines and reference markings.
Requires neck blank minimum 25" x 3" (64cm x 8)


LP-Style Chambering Templates
Potvin
MSRP:
Now:
$68.13 - $231.81
Was:
Create weight relieved LP-style bodies. There are four styles to choose from: Full Chamber, Modern, BFG and Cloud-9. Save when you order all four.
1/2" MDF with engraved center lines and...

R480 Template Set
Potvin
MSRP:
Now:
$136.33
Was:
R480
This R480 is a 25.5" scale, bolt-on neck template set. Available with T or S-style neck pocket, ready for use with your existing neck or make your own with the...

360-Style Template Set
Potvin
MSRP:
Now:
$136.33
Was:
360 Style
The 360 is a 25.5" scale (21 fret / 22 with overhang) single cutaway model. Available with T or S-style neck pocket, ready for use with your existing bolt-on neck or make...

Binding Jig LP-Style
Potvin
MSRP:
Now:
$68.13
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

T-Style Neck Template
Potvin
MSRP:
Now:
$51.76
Was:
Standard T-Style neck template.
1/2" MDF with engraved center lines and reference markings.
Requires neck blank minimum 26" x 3.5" (66cm x 9)