Potvin
Wildkat Template Set
- SKU:
- UPC:
- MPN:
- Availability:
- Usually ships in 1 to 3 weeks
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$99.95
Was:
— You save
Description
Wildkat
The Wildkat Template Set is a smaller-body (14"/35.5cm), semi-hollow guitar. Unlike the original, this set features a 25.5" scale bolt-on neck so you can use your existing T-style neck or make your own with the included neck templates.
The pickups are routed for Dog Ear P90s like the original but a standard Humbucker template is also included.
The chambering template removes ALL the internal body material so you'll need to glue a small block in place for the Tuneomatic bridge and stop tailpiece combo.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 19" x 14.5" (48cm x 37)
Related Products


T-Master Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The T-Master - it's a little bit T-Style and a little bit J-Style, a classic mash-up.
1/2" MDF with engraved center lines and reference markings.
Requires body blank minimum 20" x 14" (51cm x...

Twister Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The Twister is the Swiss Army Knife of template sets! With the choice of either T or S-Style neck/pocket, and selection of pickups and bridges, the combinations are endless! This set has...

Mosrite Template Set
Potvin
MSRP:
Now:
$99.95
Was:
This is a 24.75" scale 22 fret set neck version of a classic! Remember to order a set of Neck Angle Wedges to make routing the neck pocket at the correct angle a snap.
1/2" MDF with...

Talman Style Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The Talman-Style template set (25.5" scale, bolt-on neck) includes a neck template but also has a standard S-Style neck pocket so you can use your existing neck. Choose from several bridge...

JP6 Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The JP6 template set (24 fret, 25.5" scale length) is available with three pickup choices and three bridge choices.
If you choose the Floyd Rose bridge option, you may also be...
Customers Also Viewed


Neck Angle Wedge Kits
Potvin
MSRP:
Now:
$22.95 - $59.95
Was:
Easily route neck pockets or neck heels to the correct angle. These wedges are also incredibly handy around the shop for creating other neck angle related jigs and fixtures.
Availbe in 2...

339-Style Bolt-on Archtop Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The 339 Bolt-on template set is a 25.5" scale version of the 339 Set neck template set. The standard 25.5" scale length and T-Style heel means you can use your existing bolt-on neck, or...

Binding Jig Parlor
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesn't hold...

Floyd Rose Routing Template
Potvin
MSRP:
Now:
$49.95
Was:
Floyd Rose Recessed Routing Template
Most Floyd Rose bridge templates are generously over-sized which results in a large un-attractive gap. This template set has a tighter recess perimeter and...

Control Cavity Template Set
Potvin
MSRP:
Now:
$49.95
Was:
This control cavity template set strikes an ideal balance between big enough to contain a variety of controls, and small enough not to remove half of the guitar body. Perfect for any rear-route /...

U2 Template Set
Potvin
MSRP:
Now:
$99.95
Was:
The U2 is a 25.5" scale, 21 fret template set. The U2 (and it's single pickup U1 relative) are classics made traditionally with Masonite (hardboard) top and back attached to a poplar core. The...

335-Style Bolt-on Archtop Template Set
Potvin
MSRP:
Now:
$99.95
Was:
This is a 25.5" scale, bolt-on neck 335-style template set. This set is not only for those who want to make a traditional archtop with bent sides, although you could use these templates to do...

Binding Jig T-Style
Potvin
MSRP:
Now:
$49.95
Was:
Pre-forming binding before gluing makes life easier when you come to those sharp bends. You could just tape the binding in place on the actual body, but that wastes tape and still doesnt hold...


LP Top Carve Template Set
Potvin
MSRP:
Now:
$94.95
Was:
The LP Top Carve template set is used with your router to cut "steps" into a maple (or other) top. Once the steps are cut, you then sand away the rough steps to end up with a beautifully...

F-hole Template (Type-01)
Potvin
MSRP:
Now:
$18.95
Was:
Add some class to your guitar build with an F-hole!
1/2" MDF.