DiMarzio 6 String Humbucker Direct mount six string humbucker routing template. ALSO AVAILABLE: Seymour Duncan 6 String Humbucker Template Bare Knuckle  6 String Humbucker Template 3/4" MDF with engraved center lines.

Tele Neck / Modern 22 Frets (Allparts) Nut is not included. Screw holes for attaching to the body are not drilled.  22 jumbo frets (.118" x .055") Maple neck, sanded, unfinished and ready to spray Rosewood fingerboard 12" radius Nut...

Tele Neck / Modern 22 Frets / One Piece Maple (Allparts) Nut is not included. Screw holes for attaching to the body are not drilled.  22 jumbo frets (.118" x .055") Maple neck, sanded, unfinished and ready to spray 12" radius Nut width...

Strat Neck / Modern 22 Frets (Allparts) Nut is not included. Screw holes for attaching to the body are not drilled.  22 jumbo frets (.118" x .055") Maple neck, sanded, unfinished and ready to spray Rosewood fingerboard 12" radius Nut...

Strat Neck / Vintage 21 Frets (Allparts) Nut is not included. Screw holes for attaching to the body are not drilled.  21 vintage frets (.079" x .043") Maple neck, sanded, unfinished and ready to spray Rosewood fingerboard 7.25"...

Control Plate for Tele Standard Tele control plate.  Does NOT include mounting screws. Telecaster®, Tele® are registered trademarks of Fender Musical Instruments Corporation.

Gotoh Modern Bridge for Tele Six individually adjustable saddles for string height, radius, and intonation. For use with a Tele bridge pickup and through-body string attachment. Mounting screws included. String spread 2-1/8" (53.97mm)

Gotoh Hardtail Bridge Gotoh non-tremolo bridge, with steel saddles, with screws, 2-1/16" string spacing.

Warlock Warlock-Style template set (24 fret, 25.5" scale length) with neck-though construction.  Choose from several popular humbucker pickup options including DiMarzio, Bare Knuckle and Seymour Duncan.  Bridge options are Hipshot or...

Jack Plate for Strat Standard Stratocaster jack mounting plate. Mounting screws included. Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation.

Mandocaster The Manodcaster is an electric mandolin with a  13.78" scale length. Both 4 and 8 string neck templates are included. You can build either solid body or a chambered body with an f-hole (all included). Hardware The Mandocaster is a bit...

LEAD-II Style The LEAD was designed as a less expensive alternative to the Strat. It has a slightly smaller body but uses the same familiar neck and pickups as it's big brother. This template set is actually a combination of the LEAD-II and LEAD-III...

Parlor Singlecut Bolt-on Inspired by classic acoustic parlor guitars, this 25.5" scale  template set can be built either as a solid body or chambered. The neck template is included, but you can use your own standard T or S-Style neck. No...

Tulip The Tulip has a 25.5" scale length bolt-on neck.  The neck template is included, but you can use your own standard T or S-Style neck. The body template has a universal route to accommodate most pickup configurations.  One pickguard of...

Bartolini MK 5 String Soapbar Pickup Template From the Bartolini website:  Bass Soapbar shape that can be used for a pro-level upgrade to the Mk-1-5 pickups in Ibanez, Cort, Groove Tools, Lakland Skyline, and other import instruments...

ADD120 The ADD120 is a 25.5" scale (21 fret / 22 with overhang) double cutaway model.  Available with T or S-style neck pocket, ready for use with your existing bolt-on neck or make your own with the provided template. Ask about other...

Control Cavity (Type 3) This cavity template set is a stand-alone version of the cavity found in the RR-Template Set. . Perfect for any rear-route / no-pickguard project. 3/4" MDF

Talman Bass The Talman Bass has a 34" scale length, 20 fret neck with a rounded neck heel.  Use your existing P-Bass neck or make your own with the included template. 1/2" MDF with engraved center lines and reference markings...

360 Style The 360 is a 25.5" scale (21 fret / 22 with overhang) single cutaway model.  Available with T or S-style neck pocket, ready for use with your existing bolt-on neck or make your own with the provided template. 1/2" MDF with...

PRS Top Carve Guide Templates The PRS Top Carve template set is used with your router to cut "steps" into the top of the body.  Once the steps are cut, you then sand away the rough steps to end up with a beautifully carved top! There are...