Angled Headstock Paddle Head Neck

Angled Headstock Paddle Head Neck (Allparts)

Nut is not included. Screw holes for attaching to the body are not drilled. 

This neck is basically a Telecaster neck (25.5" scale, Tele style heel) but with an angled headstock.

IMPORTANT NOTE: Although this neck is sized to fit a standard Telecaster neck pocket, the heel on this neck is squared on either side as opposed to rounded like a Tele.  You will need to either chisel your neck pocket to match, or round the sides of the neck to match your neck pocket.  See pictures for close-up image of the heel.

• 25-1/2" scale
• 22 jumbo frets (.118" x .055")
• Mahogany neck with 14 degree angled headstock, sanded, unfinished and ready to spray.
• Rosewood fingerboard
• 12" radius
• Nut width 1-5/8"
• Heel width 2-3/16"
• No tuning Peg Holes
• Truss Rod adjustment at headstock
• Neck thickness .93" at first fret, 1.02" at twelfth fret

Unless otherwise noted, all necks are made of the highest quality wood in either the United States or Japan. No two necks are exactly the same and may differ slightly from what is pictured. All necks have a Limited Warranty against defects in materials and workmanship. Warranty does not cover normal fret wear or customer modifications. Unless otherwise noted, this neck is licensed to Allparts Music Corporation by Fender ® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender ® and no Fender ® warranty applies.

All necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. This is normal and not a defect. All necks should be carefully inspected prior to installation and/or modification. All wood is unique with individual growth patters. Allparts cannot warranty a neck that does not get a sealer/finish put on it, as humidity, sweat, and temperature can cause the neck to warp and twist.