Headstock Angle Jig
- Usually ships in 1 to 3 weeks
- Calculated at Checkout
The adjustable Headstock Angle Jig makes cutting accurate angles on neck blanks a snap. Fence adjusts from 10 to 17 degrees in 1 degree increments. Simply loosen all three star knobs, align the center knob with the desired angle and re-tighten all knobs. Available with optional Toggle Clamps or use your own quick grip or C-clamps.
- Due to the wide variety of table saw slot designs, a runner is NOT included with the jig.
- Jig comes fully assembled except for the handle which is included, but must be installed directly above runner.
- A coat of sealer is recommended, as well as an occasional application of paste wax to the bottom of the jig so it slides smoothly.
3/4" Baltic birch plywood
Sealed it, Fitted it up with a Rockler miter bar, and squared it against tablesaw blade. Works great. Works best with a 12" blade.
I just completed my first scarf joint with this jig. It's very well made and is a much better option compared to my quickly assembled homemade jig. Another nice feature is the adjustable angle which now easily gives me options.